| Author |
Message |
|
pulpmelon_mps
|
Post subject: Re: New MPS owner in Manchester  Posted: Sun May 13, 2012 3:43 pm |
|
 |
| Non Member |
 |
|
|
Joined: Thu Jan 12, 2012 4:46 pm
Posts: 1376
Has thanked: 1 time
Been thanked: 4 times
Bhp: 0
lbf·ft: 0
|
Just had the 3k oil change, 6k to go untill the motor is fully run in and the modding can begin! Is 300hp realistic from an intake and tune?
|
|
  |
|
 |
|
Danwelford
|
Post subject: Re: New MPS owner in Manchester Posted: Sun May 13, 2012 3:47 pm |
|
|
| Non Member |
|
|
|
Joined: Mon Dec 26, 2011 9:50 pm
Posts: 10951
Location: Whitby,North Yorkshire
Vehicle: MPS3 mkII
Has thanked: 2 times
Been thanked: 2 times
Bhp: 0
lbf·ft: 0
Colour: Black Mica
|
|
Yes however you may need updated hpfp to get this as on the mk2 it seems to make a big difference
|
|
| |
|
|
|
ross27
|
Post subject: Re: New MPS owner in Manchester Posted: Sun May 13, 2012 3:49 pm |
|
|
| Senior |
|
|
|
Joined: Mon Apr 11, 2011 7:52 pm
Posts: 5484
Location: Glasgow
Vehicle: Nissan
Has thanked: 0 time
Been thanked: 2 times
Bhp: 326
lbf·ft: 271
Colour: Black Mica
|
|
From what i have seen, most MK2 owners have gone for the HPFP Internals aswell when remapped.
It seems that the MK2 demands this upgrade more than the MK1 3 and the 6.
You wouldnt be far off 300 anyway.
EDIT: Dan beat me to it!
|
|
| |
|
|
|
KevMS6
|
Post subject: Re: New MPS owner in Manchester Posted: Sun May 13, 2012 3:59 pm |
|
|
| MPSOC Member |
 |
|
|
Joined: Sun Jul 11, 2010 9:01 am
Posts: 9450
Location: Morayshire
Vehicle: MPS6
Has thanked: 2 times
Been thanked: 3 times
Bhp: 360
lbf·ft: 360
Colour: Black Mica
|
ross27 wrote: From what i have seen, most MK2 owners have gone for the HPFP Internals aswell when remapped.
It seems that the MK2 demands this upgrade more than the MK1 3 and the 6.
You wouldnt be far off 300 anyway.
EDIT: Dan beat me to it! Exactly - allow an extra £300 ish to upgrade your fuel pump
_________________ ••Black Mazda 6 MPS••BNRstage1 // CpeIntercooler // Cpe3"SRI // CpeDiff brace // HTP3"tip // eBay3"Downpipe w/magnaflow 200 cell cat // AutotechHPFP // SnowPerformancemeth injection w/Aquamistjet/adaptor // Amsoilair filter w/prefilter // GoFastBitsBOV // NGKIridium IX plugs // TurbinetechDiff mount // BilsteinB12 // eBayStiS204 front lip // Whitelinerarb // OZprodrive Rx-8 alloys link to pics/mods
|
|
| |
|
|
|
pulpmelon_mps
|
Post subject: Re: New MPS owner in Manchester Posted: Sun Jun 03, 2012 11:31 pm |
|
|
| Non Member |
|
|
|
Joined: Thu Jan 12, 2012 4:46 pm
Posts: 1376
Has thanked: 1 time
Been thanked: 4 times
Bhp: 0
lbf·ft: 0
|
|
| |
|
|
|
Spam man
|
Post subject: Re: New MPS owner in Manchester Posted: Sun Jun 03, 2012 11:40 pm |
|
|
| RM BIK |
 |
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
Either or, both good quality. Which ever you can find cheapest!  missed a good Manchester meet today buddy.
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
KevMS6
|
Post subject: Re: New MPS owner in Manchester Posted: Sun Jun 03, 2012 11:41 pm |
|
|
| MPSOC Member |
|
|
|
Joined: Sun Jul 11, 2010 9:01 am
Posts: 9450
Location: Morayshire
Vehicle: MPS6
Has thanked: 2 times
Been thanked: 3 times
Bhp: 360
lbf·ft: 360
Colour: Black Mica
|
pulpmelon_mps wrote: KMD or Autotech?? Autotech is most popular. KMD's slightly cheaper. Going to be a group buy on the Autotech's I think 
_________________ ••Black Mazda 6 MPS••BNRstage1 // CpeIntercooler // Cpe3"SRI // CpeDiff brace // HTP3"tip // eBay3"Downpipe w/magnaflow 200 cell cat // AutotechHPFP // SnowPerformancemeth injection w/Aquamistjet/adaptor // Amsoilair filter w/prefilter // GoFastBitsBOV // NGKIridium IX plugs // TurbinetechDiff mount // BilsteinB12 // eBayStiS204 front lip // Whitelinerarb // OZprodrive Rx-8 alloys link to pics/mods
|
|
| |
|
|
|
Spam man
|
Post subject: Re: New MPS owner in Manchester Posted: Sun Jun 03, 2012 11:46 pm |
|
|
| RM BIK |
|
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
kevstewart wrote: pulpmelon_mps wrote: KMD or Autotech?? Autotech is most popular. KMD's slightly cheaper. Going to be a group buy on the Autotech's I think Seems that way Kev. This the one?? viewtopic.php?f=84&t=9010
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
Gavin
|
Post subject: Re: New MPS owner in Manchester Posted: Mon Jun 04, 2012 7:46 am |
|
|
| MPSOC Member |
 |
|
|
Joined: Mon Jan 30, 2012 9:49 pm
Posts: 7622
Location: scarborough
Vehicle: other
Has thanked: 2 times
Been thanked: 1 time
Bhp: 250
lbf·ft: 0
Colour: Black Mica
|
|
id say autotechs as people have had alot of trouble with early kmd's destroying the fuel pump. autotechs are the same as the day they where released where as kmd have had 9 revisions to stop them knaking up but then people have done alot of miles on kmd's with no problem but the for the few extra quid i chose autotechs
_________________
MPS KILL COUNT
1 MK1 3. twice
1 six
now driving a German whip
Mk5 r32
ita all about the noise.
Last edited by Gavin on Mon Jun 04, 2012 8:28 am, edited 1 time in total.
|
|
| |
|
|
|
Spam man
|
Post subject: Re: New MPS owner in Manchester Posted: Mon Jun 04, 2012 7:55 am |
|
|
| RM BIK |
|
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
Good call Gav, forgot about that! I'm really lucky to have got autotechs for £200 delivered! 
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
pulpmelon_mps
|
Post subject: Re: New MPS owner in Manchester Posted: Mon Jun 04, 2012 10:26 am |
|
|
| Non Member |
|
|
|
Joined: Thu Jan 12, 2012 4:46 pm
Posts: 1376
Has thanked: 1 time
Been thanked: 4 times
Bhp: 0
lbf·ft: 0
|
kendo.1985 wrote: Either or, both good quality. Which ever you can find cheapest! missed a good Manchester meet today buddy. Where did you guys meet up??
|
|
| |
|
|
|
Spam man
|
Post subject: Re: New MPS owner in Manchester Posted: Mon Jun 04, 2012 10:33 am |
|
|
| RM BIK |
|
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
We met at birch services then drove to meet the Yorkshire boys. viewtopic.php?f=86&t=9024&start=0
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
pulpmelon_mps
|
Post subject: Re: New MPS owner in Manchester Posted: Mon Jun 04, 2012 12:50 pm |
|
|
| Non Member |
|
|
|
Joined: Thu Jan 12, 2012 4:46 pm
Posts: 1376
Has thanked: 1 time
Been thanked: 4 times
Bhp: 0
lbf·ft: 0
|
kendo.1985 wrote: We met at birch services then drove to meet the Yorkshire boys. viewtopic.php?f=86&t=9024&start=0Cool - I'll keep my ear to the ground for the next one. I hope to have a few mods soon so I don't have to rock up in a boring stock mk2. 
|
|
| |
|
|
|
Spam man
|
Post subject: Re: New MPS owner in Manchester Posted: Mon Jun 04, 2012 12:52 pm |
|
|
| RM BIK |
|
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
|
You should come to the "big meet" in July. Loads are going and plenty of advice and seeing others is better than advice from just on here.
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
pulpmelon_mps
|
Post subject: Re: New MPS owner in Manchester Posted: Wed Jun 20, 2012 11:27 am |
|
|
| Non Member |
|
|
|
Joined: Thu Jan 12, 2012 4:46 pm
Posts: 1376
Has thanked: 1 time
Been thanked: 4 times
Bhp: 0
lbf·ft: 0
|
|
The wish list is pretty much:
Corksport intake
Autotech pump
And remap... the question is where?
XOpower? BBR?
|
|
| |
|
|
|
