| Author |
Message |
|
Stevos
|
Post subject: Newbie  Posted: Fri May 22, 2015 8:42 pm |
|
 |
| Non Member |
 |
|
|
Joined: Mon May 11, 2015 7:54 pm
Posts: 88
Location: Scotland
Vehicle: MPS3 mkII
Has thanked: 5 times
Been thanked: 7 times
Bhp: 0
lbf·ft: 0
Colour: Black Mica
|
Hi guys new to Mazda ownership bought a 2010 (60) Mazda 3 MPs with 29k on the clock Few little jobs to sort out needs back tires as passanger side is done think a shocker is away which has been causing wheel bounce and it tore up the inside of the tyre. The previous owner thought it was a wheel bearing as when you do 80 ( on a private road of course) there is a bad wheel bearing noise but it's definitely down to the tyre. He has changed the wheel bearing and broke the abs sensor connection and electrical taped it onto the abs sensor so will need to try and get a new connector or abs loom. Can you buy a passanger side abs wiring loom or will it be a case of getting the connector from a salvage car and soldering on another plug. Anyway I'm going on a bit. Hi guys
|
|
  |
|
 |
|
richie3mps
|
Post subject: Re: Newbie Posted: Sun May 24, 2015 8:44 am |
|
|
| MPSOC Member |
 |
|
|
Joined: Thu Dec 15, 2011 3:32 pm
Posts: 4983
Location: newport s.wales
Vehicle: MPS3 mkI aero
Has thanked: 13 times
Been thanked: 156 times
Bhp: 256
lbf·ft: 280
Colour: True Red Solid
|
|
_________________
Now Sold...Mk1 3 MPS Aero Facelift;-Corksport Stage 2 SRI+TIP//Forge BPV V2//Custom 2nd Cat & Resonator Delete//Cp-e REM 60a//SF Ssp//Kinugawa Banjo Bolt//Rear Tints//6k H-Lights//L.E.D.S//Shell Helix Ultra 5W 40//K&N Oil Filter//Goodyear Eagle f1 asymmetric 3's//
*Gone but not forgotten; moist silver mazda 6 mps*
**Winners only do what losers dont**
|
|
| |
|
|
|
~Divine~Wind~
|
Post subject: Re: Newbie Posted: Sun May 24, 2015 8:20 pm |
|
|
| Senior |
|
|
|
Joined: Fri Sep 06, 2013 7:45 pm
Posts: 2813
Location: North-East, Newcastle
Vehicle: MPS6
Has thanked: 5 times
Been thanked: 136 times
Bhp: 254
lbf·ft: 0
Colour: Velocity Red Metallic
|
|
| |
|
|
|
Gav1888
|
Post subject: Re: Newbie Posted: Sun May 24, 2015 8:23 pm |
|
|
| Non Member |
|
|
|
Joined: Sun Sep 07, 2014 3:39 pm
Posts: 673
Location: North Lanarkshire
Vehicle: MPS3 mkII
Has thanked: 56 times
Been thanked: 28 times
Bhp: 0
lbf·ft: 0
Colour: Velocity Red Metallic
|
_________________  J-TUNED,Autotech HPFP,cobb v3,cobb REM,TIP,JBR 3" tru widepath intake,Kinugawa banjo bolt,2nd de cat,ultimate racing cat back,NGK spark plugs,HR springs on koni strt, ,Powerflex ARB bushes front+back,MPS mud flaps,GFB BOV, spamface ssp,HDi FMIC,catless DP, cobb 3 port EBCS, bnrs3,3 bar map sensor an harness,JBR egr block off plate,couple struts and braces,sure anchors,south bend stage 3 clutch,stoptech brakes all round..front and rear lips and side skirts,rear spoiler extension,front eyelids,flat bottom steering wheel,carbon fibre scoop,JBR drivers side engine mount,Sure Transmission Mount,JBR RARB,Damond OCC,valve cover breather,CANT ADD REST AS NO MORE ROOM
|
|
| |
|
|
|
Kenny
|
Post subject: Re: Newbie Posted: Sun May 24, 2015 8:29 pm |
|
|
| Senior |
|
|
|
Joined: Wed Apr 24, 2013 12:12 pm
Posts: 3118
Location: Alloa, central Scotland
Vehicle: MPS3 mkI aero
Has thanked: 1 time
Been thanked: 11 times
Bhp: 0
lbf·ft: 0
Colour: Black Mica
|
|
Welcome to the forum bud!
|
|
| |
|
|
|
Stevos
|
Post subject: Re: Newbie Posted: Mon May 25, 2015 5:39 pm |
|
|
| Non Member |
|
|
|
Joined: Mon May 11, 2015 7:54 pm
Posts: 88
Location: Scotland
Vehicle: MPS3 mkII
Has thanked: 5 times
Been thanked: 7 times
Bhp: 0
lbf·ft: 0
Colour: Black Mica
|
|
Thanks guys never owned a Mazda before,had a mk1 focus rs and a4 before this but the Audi was a terrible car and the focus although I loved it. Parts were getting way too expensive.
The shock absorbers ok looks like it's just the tyre that's buggered.
|
|
| |
|
|
|
BanzaiMike
|
Post subject: Re: Newbie Posted: Mon May 25, 2015 6:41 pm |
|
|
| Senior |
|
|
|
Joined: Sun Sep 16, 2012 8:00 pm
Posts: 2275
Location: Stockport
Vehicle: MPS2
Has thanked: 3 times
Been thanked: 26 times
Bhp: 115
lbf·ft: 106
Colour: Cosmic Blue Mica
|
|
Hi and Welcome.
_________________
New motor - 2015 Mazda 2 Skyactiv 115 Sport Nav
Previous motor - 2010 Mazda 3 MPS running BNR S3 Snail and the usual bolt ons.
|
|
| |
|
|
|
MAWV
|
Post subject: Re: Newbie Posted: Mon May 25, 2015 7:27 pm |
|
|
| Non Member |
|
|
|
Joined: Mon May 04, 2015 10:00 am
Posts: 126
Vehicle: MPS3 mkII
Has thanked: 0 time
Been thanked: 3 times
Bhp: 0
lbf·ft: 0
Colour: Black Mica
|
|
Welcome to the forum, fellow newb.
|
|
| |
|
|
|
~Divine~Wind~
|
Post subject: Re: Newbie Posted: Wed May 27, 2015 3:18 pm |
|
|
| Senior |
|
|
|
Joined: Fri Sep 06, 2013 7:45 pm
Posts: 2813
Location: North-East, Newcastle
Vehicle: MPS6
Has thanked: 5 times
Been thanked: 136 times
Bhp: 254
lbf·ft: 0
Colour: Velocity Red Metallic
|
|
| |
|
|
|
Stevos
|
Post subject: Re: Newbie Posted: Wed May 27, 2015 6:54 pm |
|
|
| Non Member |
|
|
|
Joined: Mon May 11, 2015 7:54 pm
Posts: 88
Location: Scotland
Vehicle: MPS3 mkII
Has thanked: 5 times
Been thanked: 7 times
Bhp: 0
lbf·ft: 0
Colour: Black Mica
|
|
Thanks mate I have already ordered two Bridgestone potenza tyres getting them fitted at the weekend.
They are already fitted to the front and seem fairly good.
|
|
| |
|
|
|
DJJUT
|
Post subject: Re: Newbie Posted: Fri May 29, 2015 10:58 am |
|
|
| Global Moderator |
 |
|
|
Joined: Sat Feb 06, 2010 8:16 pm
Posts: 4296
Location: Grays, Essex
Vehicle: MPS6
Has thanked: 65 times
Been thanked: 137 times
Bhp: 549
lbf·ft: 449
Colour: Titanium Grey Metallic
|
 to the club 
_________________ 2010 MPS3 Mk2 Forged / Sleeved Engine, CS Cams and Crower Valve Springs, BNR S4 Turbo, HTP 3.5" Intake, HPFP Internals, 2050psi Fuel Rail Relief Valve, JMF Intake Manifold, DNP Exhaust Manifold, Dual OCC Setup, Cobb Turbo Back Exhaust, Airtec FMIC, Port Methanol Injection ..... Tuning in progress with a goal of 480-500bhp :-)  
|
|
| |
|
|
|
TheAngryDog
|
Post subject: Re: Newbie Posted: Fri May 29, 2015 3:51 pm |
|
Joined: Sun Feb 08, 2015 3:24 pm
Posts: 446
Location: Buckinghamshire
Has thanked: 74 times
Been thanked: 13 times
Bhp: 0
lbf·ft: 0
|
Welcome  !
_________________
Nothing!
|
|
| |
|
|
|
BLUNTY
|
Post subject: Re: Newbie Posted: Sat May 30, 2015 12:21 am |
|
|
| Non Member |
|
|
|
Joined: Sun Feb 13, 2011 1:23 pm
Posts: 367
Location: Sunderland
Vehicle: MPS3 mkI aero
Has thanked: 0 time
Been thanked: 15 times
Bhp: 100
lbf·ft: 50
Colour: Black Mica
|
|
_________________
Mazda MPS 3 Aero (2008) MK1
BNR3 (fitted 56,000 Miles)
Corksport HPFP
Cobb AP V3
Corksport Tmic
HTP 3" Full Intake (fitted 56,000 Miles)
Cobb 3-Port Boost Control Solenoid
235/40/18,Eagle F1 Winter/ Eagle F1 245/40/18 (Summer)
mazdaspeed Ariel
BC Coilovers
Removed the splash guard and resonator box
Febi Bilstein Prokit Rear Drop Links
Short Shift Plate(Spamface)
CFM Rear Motor Mount (9 PEGS)
JBR Pass Motor Mount 80a
JBR Trans Motor Mount 88a
JBR 125 RARB (Middle setting)
Forge V2 BPV
Stoptech Drilled Slotted Front/Rear
Step colder NGK 6510 0.7mm gap (fitted 56,000 Miles)
APT Long Downpipe
EGR Delete (fitted 56,000 Miles)
Coolant bypass
RX8 Alloys
3Bar Map Sensor and Harness (fitted 56,000 Miles)
Banjo Bolt
Motul GEAR 300 LS 75W-90 Fully Synthetic Car Limited Slip Differential Oil(Changed@59,292)
Shell Helix Ultra 5W-40 Fully Synthetic Engine Oil ( Changed every 6/7000 miles)
MOTS DONE@ Ambleside Motors
J TUNED STICKER 100+BHP
Justin tuned & Built By David Hastie
|
|
| |
|
|
|
Test Drives Unltd
|
Post subject: Re: Newbie Posted: Tue Jun 02, 2015 12:04 pm |
|
|
| Senior |
|
|
|
Joined: Tue Jan 11, 2011 10:48 pm
Posts: 1579
Location: West Sussex
Vehicle: Toyota
Has thanked: 1 time
Been thanked: 2 times
Bhp: 230
lbf·ft: 181
|
|
| |
|
|
|
