Good Afternoon Everybody

Newbie here , I have a 2012 and previously a 2010 mazda 3 MPS and on both models after about a year the lower edges of the rear light clusters start getting a green / black mould /sludge on the inside edges ! I was just wondering if anyone else has had this and if mazda were aware and would do anything about this issue .

Cheers

I had this when I bought my 6. Ended up taking the rear lights off and cleaning it out properly. Its pretty easy once you find the bolts behind the boot trim

_________________
Gtx2867R Turbo, RX8 Seats, Bilstein B8 Dampers, H&R -35mm Springs, HDI GT2 FMIC, Whiteline 24mm Rear ARB, AWR 70d REM, CPE & Sure Rear Diff Mounts, Spam SSP, HTP 3" Intake, Forge v2 Recirc, Long Downpipe, R-Spec Boost Gauge, Cobb Ap V2, Autotech Hpfp, Cobb 3 Port BCS, 3bar MAP Sensor, EGR Block Off, Throttle Body Coolant Bypass, JBR TIG's, VTCS Removal, DIY intake porting, Toyota Injector Seals. DJJUT Tune!

Farmer Chris Build Thread --> http://mpsowners.co.uk/viewtopic.php?f=180&t=16911

There's a spider in one of mine, is it simple enough once they are out? What precautions should you take so they don't mist up?

_________________
Stock 6 MPS : because it's fine as it is!

2012 still in warranty got to be worth a trip to mazda you never know your luck