Author |
Message |
taipan
|
Post subject: Newbie from Manchester area Posted: Wed Jan 09, 2013 8:57 pm |
|
 |
Non Member |
|
Joined: Wed Jan 09, 2013 8:28 pm Posts: 4 Location: Manchester Vehicle: MPS3 mkII
Has thanked: 0 time
Been thanked: 0 time
Bhp: 256
lbf·ft: 280
Colour: Velocity Red Metallic
|
Hi guys, great forum, thanx for all the info I had over the passed 6 months. Decided it was time to join rather than just sit in the wings. I'm an ex scooby & type r guy, love the 3 mps; it's a very underated car if you ask me. I've had it about 6 months now, kept it standard as I get carried away with mods once I start. Roger.
|
|
 |
|
 |
X1S1
|
Post subject: Re: Newbie from Manchester area Posted: Wed Jan 09, 2013 9:36 pm |
|
 |
Non Member |
 |
|
Joined: Fri Oct 28, 2011 2:23 pm Posts: 69 Location: Bradford Vehicle: MPS6
Has thanked: 0 time
Been thanked: 0 time
|
 WELCOME
_________________ Corksport intake & Turbo inlet pipe, 2nd De-Cat, Forge recirculation valve, Corksport Short shifter kit, Front LED Smoke Reflectors. 4 Front and 4 back parking sensors, 100w xenon front fog bulbs, MTEC 320mm front, 314mm rear Drilled,Grooved Discs EBC RED STUFF PADS. EIBACH PRO-KIT LOWERING SPRINGS
Future Plans: FORGE INTERNALS, bigger turbo upgrade
|
|
 |
|
 |
Tone
|
Post subject: Re: Newbie from Manchester area Posted: Wed Jan 09, 2013 9:37 pm |
|
 |
Senior |
 |
|
Joined: Tue Dec 18, 2012 7:40 pm Posts: 744 Location: Blackpool Vehicle: MPS3 mkII
Has thanked: 0 time
Been thanked: 0 time
Bhp: 256
lbf·ft: 280
Colour: Crystal White Pearl
|
Welcome mate, not a long drive to Blackpool I've had mine under 2 weeks and already bought an intake and other bits
_________________ SURE Aeros | SURE Sidewinder | SURE Return | SURE Element Shield | SURE Breather Line Kit | Turbosmart BPV | Black Rear Badges | Team Heko Wind Deflectors | Stubby Mazdaspeed Carbon Aerial - To fit - SURE Flow M3
|
|
 |
|
 |
KevMS6
|
Post subject: Re: Newbie from Manchester area Posted: Wed Jan 09, 2013 9:41 pm |
|
 |
MPSOC Member |
 |
|
Joined: Sun Jul 11, 2010 9:01 am Posts: 9450 Location: Morayshire Vehicle: MPS6
Has thanked: 2 times
Been thanked: 3 times
Bhp: 360
lbf·ft: 360
Colour: Black Mica
|
Hello and Good luck keeping it standard
_________________ ••Black Mazda 6 MPS••BNRstage1 // CpeIntercooler // Cpe3"SRI // CpeDiff brace // HTP3"tip // eBay3"Downpipe w/magnaflow 200 cell cat // AutotechHPFP // SnowPerformancemeth injection w/Aquamistjet/adaptor // Amsoilair filter w/prefilter // GoFastBitsBOV // NGKIridium IX plugs // TurbinetechDiff mount // BilsteinB12 // eBayStiS204 front lip // Whitelinerarb // OZprodrive Rx-8 alloys link to pics/mods
|
|
 |
|
 |
Jon
|
Post subject: Re: Newbie from Manchester area Posted: Wed Jan 09, 2013 9:41 pm |
|
 |
Senior |
 |
|
Joined: Sun Dec 04, 2011 7:49 pm Posts: 5023 Location: Rotherham Vehicle: MPS3 mkI
Has thanked: 2 times
Been thanked: 3 times
Bhp: 385
lbf·ft: 370
Colour: Moist Silver Metallic
|
The forum will stop you staying standard !
|
|
 |
|
 |
sdg_3mps
|
Post subject: Re: Newbie from Manchester area Posted: Wed Jan 09, 2013 9:53 pm |
|
 |
Founder |
|
Joined: Sat Feb 06, 2010 11:18 am Posts: 7299 Location: Leeds Vehicle: other
Has thanked: 0 time
Been thanked: 1 time
Bhp: 75
lbf·ft: 133
|
Hello and
_________________ Eco warrior lol 
|
|
 |
|
 |
Jim
|
Post subject: Re: Newbie from Manchester area Posted: Wed Jan 09, 2013 10:00 pm |
|
 |
Founder |
 |
|
Joined: Fri Feb 05, 2010 1:33 pm Posts: 7153 Location: Urmston Vehicle: RX7
Has thanked: 4 times
Been thanked: 55 times
Bhp: 261
lbf·ft: 217
|
 another in the North West, which area of Manchester? I've seen quite a few 3s around my way up Rochdale Road and M56>Princess Road
|
|
 |
|
 |
kie_taylor83
|
Post subject: Re: Newbie from Manchester area Posted: Wed Jan 09, 2013 10:21 pm |
|
 |
RM BIK |
 |
|
Joined: Sat Oct 15, 2011 6:21 pm Posts: 1138 Location: Warrington Vehicle: MPS3 mkI aero
Has thanked: 10 times
Been thanked: 6 times
Bhp: 266
lbf·ft: 286
Colour: True Red Solid
|
Welcome aboard dude. Plenty of us round Manc.
_________________ MK1 3MPS aero K&N Panel filter, Corksport TIP, MME solid shifter bushes, Poly ARB's all round and MPS mud Flaps. Thats all folks!  1327 BIK lumpif
|
|
 |
|
 |
Coop
|
Post subject: Re: Newbie from Manchester area Posted: Wed Jan 09, 2013 10:26 pm |
|
 |
Non Member |
 |
|
Joined: Fri Feb 26, 2010 4:10 pm Posts: 3437 Location: Northumberland Vehicle: MPS6
Has thanked: 0 time
Been thanked: 1 time
Bhp: 0
lbf·ft: 0
Colour: Velocity Red Metallic
|
Hi &
_________________ ZZB March 2013 :(
|
|
 |
|
 |
Spam man
|
Post subject: Re: Newbie from Manchester area Posted: Wed Jan 09, 2013 11:08 pm |
|
 |
RM BIK |
 |
|
Joined: Mon Jan 02, 2012 12:27 pm Posts: 21075 Location: Rochdale Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
Hello &  Where abouts in Manchester are you? I live in Oldham (failsworth) and work in Rochdale, I'll be keeping my eyes peeled.
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
 |
|
 |
Jonny
|
Post subject: Re: Newbie from Manchester area Posted: Thu Jan 10, 2013 1:21 pm |
|
Joined: Sat Aug 25, 2012 7:51 am Posts: 144 Location: Birmingham Vehicle: MPS6
Has thanked: 0 time
Been thanked: 0 time
|
 Great forum here.
_________________ Bilstein B12 kit, CP-E REM, Sure AEROS & TIP, uprated HPFP, Cobb AP and OTS map, Yellowstuff pads, GB spark plugs. Custom tune on the way...
|
|
 |
|
 |
Spam man
|
Post subject: Re: Newbie from Manchester area Posted: Thu Jan 10, 2013 1:22 pm |
|
 |
RM BIK |
 |
|
Joined: Mon Jan 02, 2012 12:27 pm Posts: 21075 Location: Rochdale Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
Jonny wrote: :welcome: Great forum here. You going nec on Sunday for the piston heads?
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
 |
|
 |
Jim
|
Post subject: Re: Newbie from Manchester area Posted: Thu Jan 10, 2013 2:03 pm |
|
 |
Founder |
 |
|
Joined: Fri Feb 05, 2010 1:33 pm Posts: 7153 Location: Urmston Vehicle: RX7
Has thanked: 4 times
Been thanked: 55 times
Bhp: 261
lbf·ft: 217
|
Spamdo wrote: Jonny wrote: :welcome: Great forum here. You going nec on Sunday for the piston heads? Spam face I know your aim is to have the worlds largest post count of irrelevance, but wouldn't a PM be more productive than going massively off topic on a thread created by a new user whom you're not even asking a question??  and yes I do see the irony of myself posting that too
|
|
 |
|
 |
Spam man
|
Post subject: Re: Newbie from Manchester area Posted: Thu Jan 10, 2013 2:06 pm |
|
 |
RM BIK |
 |
|
Joined: Mon Jan 02, 2012 12:27 pm Posts: 21075 Location: Rochdale Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
Didn't know this was CTR, thought it was MPSOC  Apologies.
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
 |
|
 |
Spam man
|
Post subject: Re: Newbie from Manchester area Posted: Thu Jan 10, 2013 2:12 pm |
|
 |
RM BIK |
 |
|
Joined: Mon Jan 02, 2012 12:27 pm Posts: 21075 Location: Rochdale Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
taipan wrote: Hi guys, great forum, thanx for all the info I had over the passed 6 months. Decided it was time to join rather than just sit in the wings. I'm an ex scooby & type r guy, love the 3 mps; it's a very underated car if you ask me. I've had it about 6 months now, kept it standard as I get carried away with mods once I start. Roger. I've just noticed that yours is a red mkii, are you by any chance the one I keep seeing near the vauxhall garage at the top of broadway in Chadderton/oldham near the industrial park (elk mill)
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
 |
|
 |
|