| Author |
Message |
|
Spam man
|
Post subject: Re: Almost there...!  Posted: Sat May 19, 2012 10:14 am |
|
 |
| RM BIK |
 |
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
Great news, glad you like it! Now name it.....  viewtopic.php?f=46&t=8764&hilit=+banner
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
  |
|
 |
|
Gavin
|
Post subject: Re: Almost there...! Posted: Sat May 19, 2012 10:26 am |
|
|
| MPSOC Member |
 |
|
|
Joined: Mon Jan 30, 2012 9:49 pm
Posts: 7622
Location: scarborough
Vehicle: other
Has thanked: 2 times
Been thanked: 1 time
Bhp: 250
lbf·ft: 0
Colour: Black Mica
|
|
_________________
MPS KILL COUNT
1 MK1 3. twice
1 six
now driving a German whip
Mk5 r32
ita all about the noise.
|
|
| |
|
|
|
Spam man
|
Post subject: Re: Almost there...! Posted: Sat May 19, 2012 10:46 am |
|
|
| RM BIK |
|
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
Gavin wrote: Gotta go with the flow!!
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
dsb85
|
Post subject: Re: Almost there...! Posted: Sat May 19, 2012 6:33 pm |
|
|
| Non Member |
 |
|
|
Joined: Wed May 09, 2012 6:26 pm
Posts: 953
Location: Hartlepool
Vehicle: other
Has thanked: 0 time
Been thanked: 0 time
Bhp: 188
lbf·ft: 325
|
|
Name it?! Errr.... Number plate starts with G so I'll go with Gerry I think! If I must.
Only one issue, it pulls to the left, bit annoying!
_________________
Land Rover Discovery TDV6
|
|
| |
|
|
|
KevMS6
|
Post subject: Re: Almost there...! Posted: Sat May 19, 2012 6:46 pm |
|
|
| MPSOC Member |
 |
|
|
Joined: Sun Jul 11, 2010 9:01 am
Posts: 9450
Location: Morayshire
Vehicle: MPS6
Has thanked: 2 times
Been thanked: 3 times
Bhp: 360
lbf·ft: 360
Colour: Black Mica
|
kendo.1985 wrote: Gavin wrote: Gotta go with the flow!! Best Avatar for sure... Good one 
_________________ ••Black Mazda 6 MPS••BNRstage1 // CpeIntercooler // Cpe3"SRI // CpeDiff brace // HTP3"tip // eBay3"Downpipe w/magnaflow 200 cell cat // AutotechHPFP // SnowPerformancemeth injection w/Aquamistjet/adaptor // Amsoilair filter w/prefilter // GoFastBitsBOV // NGKIridium IX plugs // TurbinetechDiff mount // BilsteinB12 // eBayStiS204 front lip // Whitelinerarb // OZprodrive Rx-8 alloys link to pics/mods
|
|
| |
|
|
|
Spam man
|
Post subject: Re: Almost there...! Posted: Sat May 19, 2012 11:34 pm |
|
|
| RM BIK |
|
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
dsb85 wrote: Name it?! Errr.... Number plate starts with G so I'll go with Gerry I think! If I must.
Only one issue, it pulls to the left, bit annoying! Should get that looked at, probably either the tracking or bad wheel balancing.
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
dsb85
|
Post subject: Re: Almost there...! Posted: Mon May 21, 2012 6:48 pm |
|
|
| Non Member |
|
|
|
Joined: Wed May 09, 2012 6:26 pm
Posts: 953
Location: Hartlepool
Vehicle: other
Has thanked: 0 time
Been thanked: 0 time
Bhp: 188
lbf·ft: 325
|
|
Also, I have noticed that there was a fair bit of water in the boot floor (where the sub is, underneath the foam). The drive home was a long one and was raining hard all the way but surely.....! Has anyone heard of or experienced this? I have dried it out and now just waiting to see if it happens again
_________________
Land Rover Discovery TDV6
|
|
| |
|
|
|
Spam man
|
Post subject: Re: Almost there...! Posted: Mon May 21, 2012 11:43 pm |
|
|
| RM BIK |
|
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
|
New one on me, check the rubber seals
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
dsb85
|
Post subject: Re: Almost there...! Posted: Tue May 22, 2012 6:53 am |
|
|
| Non Member |
|
|
|
Joined: Wed May 09, 2012 6:26 pm
Posts: 953
Location: Hartlepool
Vehicle: other
Has thanked: 0 time
Been thanked: 0 time
Bhp: 188
lbf·ft: 325
|
|
The boot itself and carpet etc is Bon dry, it was just the very bottom, the floor pan if u lik! Strange eh?!
_________________
Land Rover Discovery TDV6
|
|
| |
|
|
|
Spam man
|
Post subject: Re: Almost there...! Posted: Tue May 22, 2012 5:12 pm |
|
|
| RM BIK |
|
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
|
Very unusual, just keep an eye on it next time it rains heavily.
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
dsb85
|
Post subject: Re: Almost there...! Posted: Tue May 22, 2012 5:53 pm |
|
|
| Non Member |
|
|
|
Joined: Wed May 09, 2012 6:26 pm
Posts: 953
Location: Hartlepool
Vehicle: other
Has thanked: 0 time
Been thanked: 0 time
Bhp: 188
lbf·ft: 325
|
|
Yeh, Gunna av to mate! Cheers! Think I'm Gunna have to do a few mods soon, what u think first?
_________________
Land Rover Discovery TDV6
|
|
| |
|
|
|
Spam man
|
Post subject: Re: Almost there...! Posted: Tue May 22, 2012 5:57 pm |
|
|
| RM BIK |
|
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
|
Generally first is SRI & TIP. Then de-cat. REM is good too,
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
dsb85
|
Post subject: Re: Almost there...! Posted: Tue May 22, 2012 6:25 pm |
|
|
| Non Member |
|
|
|
Joined: Wed May 09, 2012 6:26 pm
Posts: 953
Location: Hartlepool
Vehicle: other
Has thanked: 0 time
Been thanked: 0 time
Bhp: 188
lbf·ft: 325
|
|
Got my eye on an Sri and tip already, would like a remap but I'm not sure on de cat, I don't want much noise from the exhaust as I share this car with the wife! She's defo not a fan of loud exhausts!!!
_________________
Land Rover Discovery TDV6
|
|
| |
|
|
|
Spam man
|
Post subject: Re: Almost there...! Posted: Tue May 22, 2012 6:36 pm |
|
|
| RM BIK |
|
|
|
Joined: Mon Jan 02, 2012 12:27 pm
Posts: 21075
Location: Rochdale
Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
|
A de-cat doesn't really make it louder, just a much nicer tone, a little beefier, plus more bhp ;-)
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
| |
|
|
|
dsb85
|
Post subject: Re: Almost there...! Posted: Tue May 22, 2012 6:38 pm |
|
|
| Non Member |
|
|
|
Joined: Wed May 09, 2012 6:26 pm
Posts: 953
Location: Hartlepool
Vehicle: other
Has thanked: 0 time
Been thanked: 0 time
Bhp: 188
lbf·ft: 325
|
|
All about the bhp eh? It doesn't make it louder? U sure? Coz I'm Gunna get asked to promise that u know!!! Hahaha
_________________
Land Rover Discovery TDV6
|
|
| |
|
|
|
