Author |
Message |
mark 6 mps
|
Post subject: Well happy Posted: Mon Mar 26, 2012 6:49 pm |
|
 |
MPSOC Member |
 |
|
Joined: Fri Mar 23, 2012 11:04 am Posts: 293 Location: dartford Vehicle: MPS6
Has thanked: 0 time
Been thanked: 0 time
Bhp: 256
lbf·ft: 0
Colour: Titanium Grey Metallic
|
I've had my new mps for a little over two weeks now. I started having a few slight mis fires when i was trying to pull away from the lights. a little hesitation when i was in 2nd and 3rd. But I bought this car knowing i'd have a few minor problems. (Only because it had been stood a while!) Well i say little i spent a couple of days on the forum looking for clues and when i started seeing people that had changed the o2 sensors and maf's and still had no joy. I'll be honest i was a little sad. But then i sore this one thread and i can't remember the fellas name. But if i could remember it i'd let him know i was willing to send him some money so he could have a beer on me. Plan and simple a slight strech of the coil springs a clean of the earth and she go's. Better then on the test drive and i thought that quick.. One well happy mps owner...
_________________ Current mods Sure short shift plate/jbr rem/k&n air filter/ 2nd decat/mtec brake discs/yellow stuff pads all round/hel braided brake lines/dot 5.1 fluid/millers oils throughout/corksport diff and gearbox mounts RX8 alloys black with uniroyal rain sport 3/ fibreglass front grill in black. Gfb response with whistle trumpet/ Interior, boot and footwell led kit. Cobb v3 ordered from new age autos.
Future mods::: Exhaust, intake and cs hpfp internals.
|
|
 |
|
 |
KevMS6
|
Post subject: Re: Well happy Posted: Mon Mar 26, 2012 8:04 pm |
|
 |
MPSOC Member |
 |
|
Joined: Sun Jul 11, 2010 9:01 am Posts: 9450 Location: Morayshire Vehicle: MPS6
Has thanked: 2 times
Been thanked: 3 times
Bhp: 360
lbf·ft: 360
Colour: Black Mica
|
Good to see a happy member!! Did you clean the maf/IAT sensor? Definately made my car smoother
_________________ ••Black Mazda 6 MPS••BNRstage1 // CpeIntercooler // Cpe3"SRI // CpeDiff brace // HTP3"tip // eBay3"Downpipe w/magnaflow 200 cell cat // AutotechHPFP // SnowPerformancemeth injection w/Aquamistjet/adaptor // Amsoilair filter w/prefilter // GoFastBitsBOV // NGKIridium IX plugs // TurbinetechDiff mount // BilsteinB12 // eBayStiS204 front lip // Whitelinerarb // OZprodrive Rx-8 alloys link to pics/mods
|
|
 |
|
 |
deltalimamike
|
Post subject: Re: Well happy Posted: Mon Mar 26, 2012 9:18 pm |
|
 |
Senior |
|
Joined: Sat Feb 06, 2010 3:47 pm Posts: 10765 Location: Essex Vehicle: MX5 mkI
Has thanked: 20 times
Been thanked: 27 times
Bhp: 0
lbf·ft: 0
|
you will probably get alot of claimants on the coil spring stretch if you are offering beer. Ill go first, it was me
|
|
 |
|
 |
Spam man
|
Post subject: Re: Well happy Posted: Mon Mar 26, 2012 9:42 pm |
|
 |
RM BIK |
 |
|
Joined: Mon Jan 02, 2012 12:27 pm Posts: 21075 Location: Rochdale Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
deltalimamike wrote: you will probably get alot of claimants on the coil spring stretch if you are offering beer. Ill go first, it was me  Liar! It was me! I know everything about all makes of cars and how to service them etc.....honest
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
 |
|
 |
martin_46
|
Post subject: Re: Well happy Posted: Tue Mar 27, 2012 6:14 am |
|
 |
Senior |
 |
|
Joined: Mon Jul 26, 2010 7:52 pm Posts: 3761 Location: Aberdeenshire Vehicle: MPS3 mkII
Has thanked: 0 time
Been thanked: 2 times
Bhp: 0
lbf·ft: 0
Colour: Crystal White Pearl
|
Pleased to hear you got sorted out mate
_________________ Trying to resist modifying my new Mazda 3 mk2 MPS! viewtopic.php?f=86&t=13680
|
|
 |
|
 |
mark 6 mps
|
Post subject: Re: Well happy Posted: Tue Mar 27, 2012 6:43 am |
|
 |
MPSOC Member |
 |
|
Joined: Fri Mar 23, 2012 11:04 am Posts: 293 Location: dartford Vehicle: MPS6
Has thanked: 0 time
Been thanked: 0 time
Bhp: 256
lbf·ft: 0
Colour: Titanium Grey Metallic
|
Sounds like the bar bill is going to be rather large.
_________________ Current mods Sure short shift plate/jbr rem/k&n air filter/ 2nd decat/mtec brake discs/yellow stuff pads all round/hel braided brake lines/dot 5.1 fluid/millers oils throughout/corksport diff and gearbox mounts RX8 alloys black with uniroyal rain sport 3/ fibreglass front grill in black. Gfb response with whistle trumpet/ Interior, boot and footwell led kit. Cobb v3 ordered from new age autos.
Future mods::: Exhaust, intake and cs hpfp internals.
|
|
 |
|
 |
DJJUT
|
Post subject: Re: Well happy Posted: Tue Mar 27, 2012 7:13 pm |
|
 |
Global Moderator |
 |
|
Joined: Sat Feb 06, 2010 8:16 pm Posts: 4296 Location: Grays, Essex Vehicle: MPS6
Has thanked: 65 times
Been thanked: 137 times
Bhp: 549
lbf·ft: 449
Colour: Titanium Grey Metallic
|
Hi and  to the club
_________________ 2010 MPS3 Mk2 Forged / Sleeved Engine, CS Cams and Crower Valve Springs, BNR S4 Turbo, HTP 3.5" Intake, HPFP Internals, 2050psi Fuel Rail Relief Valve, JMF Intake Manifold, DNP Exhaust Manifold, Dual OCC Setup, Cobb Turbo Back Exhaust, Airtec FMIC, Port Methanol Injection ..... Tuning in progress with a goal of 480-500bhp :-)  
|
|
 |
|
 |
mark 6 mps
|
Post subject: Re: Well happy Posted: Tue Mar 27, 2012 10:04 pm |
|
 |
MPSOC Member |
 |
|
Joined: Fri Mar 23, 2012 11:04 am Posts: 293 Location: dartford Vehicle: MPS6
Has thanked: 0 time
Been thanked: 0 time
Bhp: 256
lbf·ft: 0
Colour: Titanium Grey Metallic
|
Djjut I'm loving that motor fella. I want that grill so much.
_________________ Current mods Sure short shift plate/jbr rem/k&n air filter/ 2nd decat/mtec brake discs/yellow stuff pads all round/hel braided brake lines/dot 5.1 fluid/millers oils throughout/corksport diff and gearbox mounts RX8 alloys black with uniroyal rain sport 3/ fibreglass front grill in black. Gfb response with whistle trumpet/ Interior, boot and footwell led kit. Cobb v3 ordered from new age autos.
Future mods::: Exhaust, intake and cs hpfp internals.
|
|
 |
|
 |
deltalimamike
|
Post subject: Re: Well happy Posted: Wed Mar 28, 2012 7:40 am |
|
 |
Senior |
|
Joined: Sat Feb 06, 2010 3:47 pm Posts: 10765 Location: Essex Vehicle: MX5 mkI
Has thanked: 20 times
Been thanked: 27 times
Bhp: 0
lbf·ft: 0
|
mark 6 mps wrote: Djjut I'm loving that motor fella. I want that grill so much. the best looking car on here imo with kevstewart a VERY close 2nd.
|
|
 |
|
 |
Spam man
|
Post subject: Re: Well happy Posted: Wed Mar 28, 2012 10:41 am |
|
 |
RM BIK |
 |
|
Joined: Mon Jan 02, 2012 12:27 pm Posts: 21075 Location: Rochdale Vehicle: other
Has thanked: 12 times
Been thanked: 251 times
Bhp: 430
lbf·ft: 395
Colour: Titanium Grey Metallic
|
deltalimamike wrote: mark 6 mps wrote: Djjut I'm loving that motor fella. I want that grill so much. the best looking car on here imo with kevstewart a VERY close 2nd. That's uk based, in my opinion the white 6s of Aus take the top spot, looks wise anyhow.
_________________ 100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys Build thread http://tinyurl.com/otzp6qwHelpful threads http://tinyurl.com/kjykgbdhttp://www.ThroughTheLensMedia.co.uk AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073
|
|
 |
|
 |
DJJUT
|
Post subject: Re: Well happy Posted: Wed Mar 28, 2012 11:26 pm |
|
 |
Global Moderator |
 |
|
Joined: Sat Feb 06, 2010 8:16 pm Posts: 4296 Location: Grays, Essex Vehicle: MPS6
Has thanked: 65 times
Been thanked: 137 times
Bhp: 549
lbf·ft: 449
Colour: Titanium Grey Metallic
|
mark 6 mps wrote: Djjut I'm loving that motor fella. I want that grill so much. Thanks mate.... you can get the front grill from a company called Speedline that I found via Ebay..... think I paid about $100 plus cost of getting it sprayed up.
_________________ 2010 MPS3 Mk2 Forged / Sleeved Engine, CS Cams and Crower Valve Springs, BNR S4 Turbo, HTP 3.5" Intake, HPFP Internals, 2050psi Fuel Rail Relief Valve, JMF Intake Manifold, DNP Exhaust Manifold, Dual OCC Setup, Cobb Turbo Back Exhaust, Airtec FMIC, Port Methanol Injection ..... Tuning in progress with a goal of 480-500bhp :-)  
|
|
 |
|
 |
rusty2503
|
Post subject: Re: Well happy Posted: Thu Mar 29, 2012 8:22 am |
|
 |
MPSOC Member |
 |
|
Joined: Fri Apr 30, 2010 4:47 pm Posts: 2629 Location: Aberdeen Vehicle: MPS6
Has thanked: 0 time
Been thanked: 0 time
Bhp: 310
lbf·ft: 325
Colour: Black Mica
|
Hello and
_________________ Asuka Racing alloys 225/40/18 Kumho rubber.2.5in Power Flo cat back,BBR Hybrid Turbo,BBR Downpipe (200 cell cat) 3 port boost solenoid Upgrade TMIC, HPFP, Simota SRI & Tip, Forge re-circ dv. colder plugs. Front and Rear DBA slotted discs braided lines & Hawk Pads.H&R springs & B8 Bilstein shocks.Rolled archs, debadged.Corksport front strut brace.CP.E rear engine mount Barone stage 2 short shift plate & bushings & heavy shift knob.LED tinted rear light cluster.Oil temp Boost & oil pressure guages Tinted windows Carbon Fibre badges and interior
|
|
 |
|
 |
Jim
|
Post subject: Re: Well happy Posted: Thu Mar 29, 2012 11:24 am |
|
 |
Founder |
 |
|
Joined: Fri Feb 05, 2010 1:33 pm Posts: 7153 Location: Urmston Vehicle: RX7
Has thanked: 4 times
Been thanked: 55 times
Bhp: 261
lbf·ft: 217
|
Hello
|
|
 |
|
 |
Daz
|
Post subject: Re: Well happy Posted: Thu Mar 29, 2012 11:43 am |
|
 |
Non Member |
 |
|
Joined: Fri Apr 16, 2010 9:56 am Posts: 4030 Location: North east Vehicle: MPS6
Has thanked: 1 time
Been thanked: 1 time
Bhp: 0
lbf·ft: 0
Colour: Black Mica
|
Hello and welcome! .
_________________ To do: keep it on the road.
|
|
 |
|
 |
KevMS6
|
Post subject: Re: Well happy Posted: Fri Mar 30, 2012 9:22 pm |
|
 |
MPSOC Member |
 |
|
Joined: Sun Jul 11, 2010 9:01 am Posts: 9450 Location: Morayshire Vehicle: MPS6
Has thanked: 2 times
Been thanked: 3 times
Bhp: 360
lbf·ft: 360
Colour: Black Mica
|
deltalimamike wrote: mark 6 mps wrote: Djjut I'm loving that motor fella. I want that grill so much. the best looking car on here imo with kevstewart a VERY close 2nd. I agree Justin's is my favourite in the uk
_________________ ••Black Mazda 6 MPS••BNRstage1 // CpeIntercooler // Cpe3"SRI // CpeDiff brace // HTP3"tip // eBay3"Downpipe w/magnaflow 200 cell cat // AutotechHPFP // SnowPerformancemeth injection w/Aquamistjet/adaptor // Amsoilair filter w/prefilter // GoFastBitsBOV // NGKIridium IX plugs // TurbinetechDiff mount // BilsteinB12 // eBayStiS204 front lip // Whitelinerarb // OZprodrive Rx-8 alloys link to pics/mods
|
|
 |
|
 |
|