Hello everyone, just introducing myself.
I'm Joe from Preston and I've just picked up my first 3 MPS, my last cars have been a Clio 172 then a Mk1 MX-5.

I decided I needed something a bit more practical and this mk1 aero sort of popped up down the road.
I'll post up some pictures when I can

Hi and welcome to the club

Sent from my SM-G930F using Tapatalk

_________________
2010 MPS3 Mk2 Forged / Sleeved Engine, CS Cams and Crower Valve Springs, BNR S4 Turbo, HTP 3.5" Intake, HPFP Internals, 2050psi Fuel Rail Relief Valve, JMF Intake Manifold, DNP Exhaust Manifold, Dual OCC Setup, Cobb Turbo Back Exhaust, Airtec FMIC, Port Methanol Injection ..... Tuning in progress with a goal of 480-500bhp :-)

Mk1s 3s are getting rare good choice

_________________
Mazda MPS 3 Aero (2008) MK1
BNR3 (fitted 56,000 Miles)
Corksport HPFP
Cobb AP V3
Corksport Tmic
HTP 3" Full Intake (fitted 56,000 Miles)
Cobb 3-Port Boost Control Solenoid
235/40/18,Eagle F1 Winter/ Eagle F1 245/40/18 (Summer)
mazdaspeed Ariel
BC Coilovers
Removed the splash guard and resonator box
Febi Bilstein Prokit Rear Drop Links
Short Shift Plate(Spamface)
CFM Rear Motor Mount (9 PEGS)
JBR Pass Motor Mount 80a
JBR Trans Motor Mount 88a
JBR 125 RARB (Middle setting)
Forge V2 BPV
Stoptech Drilled Slotted Front/Rear
Step colder NGK 6510 0.7mm gap (fitted 56,000 Miles)
APT Long Downpipe
EGR Delete (fitted 56,000 Miles)
Coolant bypass
RX8 Alloys
3Bar Map Sensor and Harness (fitted 56,000 Miles)
Banjo Bolt
Motul GEAR 300 LS 75W-90 Fully Synthetic Car Limited Slip Differential Oil(Changed@59,292)
Shell Helix Ultra 5W-40 Fully Synthetic Engine Oil ( Changed every 6/7000 miles)
MOTS DONE@ Ambleside Motors

J TUNED STICKER 100+BHP



Justin tuned & Built By David Hastie

Welcome along, down road from me in blackpool.
Good choice mk1 aero.

Sent from my SM-G900F using Tapatalk