hi all,

I've recently bought myself a mps3 and am looking to tune her up!
so I went out and bought versatune thinking it was easy to use how wrong was I
after days of looking and playing around I have come to the conclusion that it is a bit beyond me at this present time with my limited knowledge of turbo tuning and the last thing I want to do is hurt my new baby so I was wondering if their was anybody on the forum who I could get to tune my mps3 up?

many thanks
Doddy

Find yourself DJJUT and ask him nicely. You'll need a Cobb Accessport or VersaTuner as well as a PC/laptop (which presumably you have).

There's a reason he gets called Mr Wizard, and it's not because he knows magic tricks... He does, but that's not why he's called Mr Wizard.

_________________

yes mate I have versatune already
thanks for the heads up dave I will send him a pm and se how I get on from their

m,any thanks
Doddy

justin is the main man.
But get hpfp internals first or he won't touch it. Should be the first thing you got really

_________________
100% Meth / Fully forged / ACT 6 Puc & lightweight flywheel / monlar rods / wiseco pistons / arp studs / Versatune / corksport FMIC / Garrett GTX3076 / Brock Injector seals / Autotechs / Dreadnought & Juggernaut / GT RARB / Speedline front lower struts / Speedline lateral struts / corksport front braces / corksport rear upper braces / CS side braces /H&R springs / Bilstein B8's / CS BBK / Rear EBC Yellowstuff / JBR 5mm spacers / JBR OCC / Forge V2 / AWR 80a REM / 3" DP / Jetex / 3.25" Sure intake / Sure BSD / SURE TIG / Butterfly delete / EGR blockoff / Hel brake lines / Xcarlink / kendo SSP & Bushes / Step colder NGK 0.6mm gap / Fog and Driving light HID's / MKii alloys
Build thread http://tinyurl.com/otzp6qw
Helpful threads http://tinyurl.com/kjykgbd
http://www.ThroughTheLensMedia.co.uk
AVOID TOTAL MPS http://www.mpsowners.co.uk/viewtopic.php?f=64&t=20073

ok thanks sir_spamface,

I have pm`d him so I will se what he says I've been told by bbr that the stock pump should be ok up to 290bhp is this not the case?

I've been tuned without HPFP internals, but I'm still going to get them just to be on the safe side. Then Justin can give it even more beans.

_________________
Mods: JBR SRI/TIP || JBR Shifter Bushings || SF SSP || Custom 2nd Decat + Silencer || Forge v2 BPV || Cobb v2 || J-Tune || Bilstein B8

Thanks eliot I do have them on my wish list to get

There is no "best" person , the big hitters can all get you where you want to be.

You have :

purple drank
ray dagher
freektune

Freek is probably the biggest in the world , purple drank dont tune versa the last time i heard.

_________________



If you want to play be ready to pay ££

MPS NOW SOLD , COME FORTH THE X-TYPE (RIP) , COME FORTH THE BRAVO DERV

BNRS3 HTP 3" INTAKE AUTOTECH HPFP FORGE INTERCOOLER TOTAL MPS DOWNPIPE KFORD TYRES 3" PIPEWORK & MIJ BACKBOX COBB 3PORT EBS DICE DUST CAPS TB COOLANT DELETE FORGE V2 BPV JBR REM 88a DAGHER TUNED 3Bar Map Sensor

Freek Tune FTW

_________________
2010 MPS3 Mk2 Forged / Sleeved Engine, CS Cams and Crower Valve Springs, BNR S4 Turbo, HTP 3.5" Intake, HPFP Internals, 2050psi Fuel Rail Relief Valve, JMF Intake Manifold, DNP Exhaust Manifold, Dual OCC Setup, Cobb Turbo Back Exhaust, Airtec FMIC, Port Methanol Injection ..... Tuning in progress with a goal of 480-500bhp :-)

Since when has anyone recomended freaktune etc over jtune?

_________________
Wisseco pistons, Manley h beam rods, Arp main stud kit, Arp head stud kit, Fidanza ali flywheel, Cpe Balance shaft delete, Damond Egr delete kit, Inlet manifold butterfly delete, Coolent bypass, Cpe injector seals, Htp 3" intake, Aem cone filter, Bnr stage4 turbocharger, Grimspeed 3port bcs, Bosch 3bar map sensor, Ngk 1 step colder, 3" catless downpipe, 2nd decat delete, Cxracing custom pipes, Treadstone tr8 fmic, Sure short shift kit, Mme solid shifter bushes, Custom 676g gear knob, Xspower manifold, Devils own meth injection, Forge recirc valve, Autotech hpfp, Jbr thermal intake gasket, Hel stainless lines, Rear defuser, jbr air dam, Mk2 alloys, Versatuner.

DJJUT^^^^^^^^ is who u want..
But get HPFP internals first especially on mk2
And to

_________________

J-TUNED,Autotech HPFP,cobb v3,cobb REM,TIP,JBR 3" tru widepath intake,Kinugawa banjo bolt,2nd de cat,ultimate racing cat back,NGK spark plugs,HR springs on koni strt, ,Powerflex ARB bushes front+back,MPS mud flaps,GFB BOV, spamface ssp,HDi FMIC,catless DP, cobb 3 port EBCS, bnrs3,3 bar map sensor an harness,JBR egr block off plate,couple struts and braces,sure anchors,south bend stage 3 clutch,stoptech brakes all round..front and rear lips and side skirts,rear spoiler extension,front eyelids,flat bottom steering wheel,carbon fibre scoop,JBR drivers side engine mount,Sure Transmission Mount,JBR RARB,Damond OCC,valve cover breather,
CANT ADD REST AS NO MORE ROOM

The man himself lol . How many other tuners have you tried.

They are all good imo.

_________________



If you want to play be ready to pay ££

MPS NOW SOLD , COME FORTH THE X-TYPE (RIP) , COME FORTH THE BRAVO DERV

BNRS3 HTP 3" INTAKE AUTOTECH HPFP FORGE INTERCOOLER TOTAL MPS DOWNPIPE KFORD TYRES 3" PIPEWORK & MIJ BACKBOX COBB 3PORT EBS DICE DUST CAPS TB COOLANT DELETE FORGE V2 BPV JBR REM 88a DAGHER TUNED 3Bar Map Sensor

Im not saying they arent. But uk wise jtune is best.

_________________
Wisseco pistons, Manley h beam rods, Arp main stud kit, Arp head stud kit, Fidanza ali flywheel, Cpe Balance shaft delete, Damond Egr delete kit, Inlet manifold butterfly delete, Coolent bypass, Cpe injector seals, Htp 3" intake, Aem cone filter, Bnr stage4 turbocharger, Grimspeed 3port bcs, Bosch 3bar map sensor, Ngk 1 step colder, 3" catless downpipe, 2nd decat delete, Cxracing custom pipes, Treadstone tr8 fmic, Sure short shift kit, Mme solid shifter bushes, Custom 676g gear knob, Xspower manifold, Devils own meth injection, Forge recirc valve, Autotech hpfp, Jbr thermal intake gasket, Hel stainless lines, Rear defuser, jbr air dam, Mk2 alloys, Versatuner.

Isn't that the beauty of e-tuning , the mapper could live on the moan as-long as he has at-least a dial up connection you will get that map

It would be good if justin had the PRO version of ATR and people could go down get tuned in a day with him in the car live mapping .

_________________



If you want to play be ready to pay ££

MPS NOW SOLD , COME FORTH THE X-TYPE (RIP) , COME FORTH THE BRAVO DERV

BNRS3 HTP 3" INTAKE AUTOTECH HPFP FORGE INTERCOOLER TOTAL MPS DOWNPIPE KFORD TYRES 3" PIPEWORK & MIJ BACKBOX COBB 3PORT EBS DICE DUST CAPS TB COOLANT DELETE FORGE V2 BPV JBR REM 88a DAGHER TUNED 3Bar Map Sensor

People are quite welcome to come to me with their Cobb or VT and get a tune sorted....... don't need pro for that [WHITE SMILING FACE]

_________________
2010 MPS3 Mk2 Forged / Sleeved Engine, CS Cams and Crower Valve Springs, BNR S4 Turbo, HTP 3.5" Intake, HPFP Internals, 2050psi Fuel Rail Relief Valve, JMF Intake Manifold, DNP Exhaust Manifold, Dual OCC Setup, Cobb Turbo Back Exhaust, Airtec FMIC, Port Methanol Injection ..... Tuning in progress with a goal of 480-500bhp :-)